Prepare the detector
Prepare the source-established coil, stem and required battery arrangement following its instructions.
A 6.5-inch coil detector with pointer display and all-metal/discrimination modes.
Prepare your selected setup and follow the model instructions.
Prepare the source-established coil, stem and required battery arrangement following its instructions.
Choose the supported controls or mode for a permitted search area.
Follow the detector’s visual or audible indications within its model limits.
Search permitted dry areas.
Follow the selected search mode.
Keep the housing out of the water.
Prepare the source-established coil and controls.
The selected detector, stem and search coil.
Two 9 V 6F22 batteries are required and not included; extra accessories are not established.
Pointer and sound indications in a traditional detector layout. MetalScout 6.5 uses a 6.5-inch coil with all-metal and discrimination modes.
The mechanical pointer presents the response without a digital screen. Adjustable sound volume and a headphone connection offer audio choices, while the supplier lists 5 kHz operation and two separate 9 V batteries.
| Coil diameter | 6.5-inch |
|---|---|
| Listed operating frequency | 5 kHz |
| Modes | All-metal and discrimination |
| Display | Mechanical pointer |
| Power | Two 9 V 6F22 batteries, not included |
Choose the current finish and provide the required batteries. Check the operating instructions for the all-metal and discrimination modes and the audio arrangement you plan to use.
BELVOX MetalScout 6.5 – Analogue Metal Detector