Prepare the receiver
Check the selected receiver, supplied components and required power arrangement.
Wireless sonar information on the FF1108 colour receiver, with rechargeable battery power.
Prepare your selected setup and follow the model instructions.
Check the selected receiver, supplied components and required power arrangement.
Use the selected sensor arrangement following the model’s documented operating conditions.
Read the supported sonar information and settings without treating the display as a camera image.
Follow the supported sonar information.
Keep the receiver at the viewing position.
Check the model’s operating conditions.
Confirm sensor and power arrangement.
The FF1108 receiver and wireless-sensor kit.
Check the selected charging connection; no UK mains plug is implied.
Follow sonar information on a colour handset. SonarView FF1108 pairs the source FF1108-1CWLA with a wireless sonar sensor and 2.4-inch display.
The LUCKY model lists depth and water-temperature information, fish-position indicators and bottom-contour views. Adjustable sensitivity, chart speed, units and alert settings provide controls for the information shown, with rechargeable 3.7 V battery power.
| Model | FF1108-1CWLA |
|---|---|
| Display | 2.4-inch TFT colour LCD |
| Sonar frequency | 125 kHz |
| Listed beam angle | 90° |
| Listed wireless range | Up to 150 m; conditions dependent |
| Power | Rechargeable 3.7 V lithium battery |
Choose the current FF1108-1CWLA configuration. The supplier lists a handset, wireless sensor, USB cable, charging accessories, strap, cloth and instructions. Check the selected charging connection for your mains setup.
BELVOX SonarView FF1108 – Wireless Fish Finder